You will also get to enjoy ultimate appearance of this amplifier in your car, which is not the case with other amplifiers. Installing this amplifier in your car means getting assured of enjoying quality sounds free from distortion and heavy duty bass. XM-SW1 In-car Xplod Amplifier can deliver a maximum output power of 350W and a frequency response of 5-160Hz.

This amplifier also delivers MOSFET Power Supply. The low pass filter limit of this product is 160Hz and 18dB/oct. 140W x 1 is the rated output power delivered by this amplifier. All you need is to spend Rs. 3,990 to buy XM-SW1 In-car Xplod Amplifier for your car.

The M-1350 mono subwoofer amplifier from Sound Ordnance features a strong built, rugged appearance, and a warranty period of three years. The added attraction is that you can even add the sound ordnance to your car arsenal at a relative less price.

The 350-watt wallop of the amplifier gives your car subwoofers strong and powerful sound quality. In addition, the controlling of the bass is made easy with a modifiable low-pass filter and a unique bass boost.

The power supply and output used for the M-1350 amplifier is sophisticated and quality, which guarantees clean use from start till end. There are special circuits that guard the amplifier from short circuits and an addition turn-on delay ceases the annoying thump while turning the system on.

Some of the other features of the M-1350 mono subwoofer amplifier from Sound Ordnance include low-pass filter with adjustable facility, selectable bass boost, and changeable subsonic filter.

Moreover it has a PWM power supply with MOSFET output and a fuse rating of 25A x 2 amongst others.

This power series amp reduces power consumption with its low-distortion, low-noise circuitry. Moreover, it also ensures accurate reproduction. In addition, the added high-frequency response adds in instrumental overtones that add new dimensions to your music.

With Jensen’s 5-channel Power Series 5500 amplifier, you simply need one amp for your entire system. Moreover, this power series sends 60 watts RMS to all the four speakers in your car and it allows the sub as much as 250 watts RM.

Another option is to switch the amp to 3-channel mode, thereby sending 160 watts RMS to each speaker and allowing 250 watts for the sub.

As far as the shape and sound of the amplifier is concerned, its tone and filter controls the sound system of your car. In addition, with the 4-channel section, the high-pass filters are kept in bass.

In case of the subwoofer, the perfect bass is provided through features such as low-pass filter, a bass boost and a subsonic filter.

The make and design of the amplifier offers the best equilibrium between innovation and tradition that presents the finest combination for the audiophile. Amongst other important features that count in this product are engineering elegance, powerful and high end sound qualities, precise cards or flexible onboard adjuster filters, vehicle specific setup card for enhanced performance, compact dimensions, power to handle loards upto 1Ohm stereo and Simple design.

Moreover, with a size that goes 350*200*50 mm and a weight of over – 3, 5 kg, along with other technical features like, Input sensitivity (Power rating ref) of 0.2 V ÷ 5 V, and Xover functions (BAND Pass allowed) HIGH Pass & LOW Pass of (20 ÷ 175 Hz) & (50 ÷ 30 0Hz) respectively, Mosconi Gladen AS 100.4 is set to hit the market.

All this and much more makes the Mosconi Gladen AS 100.4, one of the most sought after amplifier’s of the day.

Pioneer once again comes up with a winner. The all new Pioneer RS-A9 amplifier is the latest offering from Pioneer and it gives a completely new and enhanced experience when it comes to listening to music. It features a 32 bit equalizer and network control functions that give you a complete command over music play. Its optical digital input enables the amplifier to sync digitally with the RS-D7RII CD tuner and thus producing the optimum quality sound from the music system.

The set up also has 3 digital outputs that enable you to connect up to 3 Pioneer digital amplifiers to your speakers, thus creating a highly enhanced music system. The RS-A9 is highly effective in mid-range speakers or tweeters, giving out crystal clear and smooth tunes. Its features along with the design help create a truly digital environment giving out the best possible sound quality.

Its primary features include:

• Maximum Power Output of 4x100W – 2 x 300W
• Continuous Power Output of 50Wx4 / 150Wx2 / 75Wx4RMS
• Load Impedance of 2-8 ohm
• Frequency response- 10-100,000 HZ
• Distortion- <0.002%
• Integrated DSP LPF
• Max Current Consumption-31A

In order to get the best quality audio, the RS-A9 needs to combine with products in this series. The RS-A9 is a very simple device that has been laced with state of art technology thus making it a perfect blend of highly sophisticated technology with very user friendly features. It is almost a perfect choice for any music lover!

The KS-AR9501D Arsenal Amplifier is a wonderful digital amplifier that is announced by the JVC Mobile and promises to be a real delight for the retailers and enthusiasts. JVC is known all over the world for its distribution of audio and video equipment for consumer as well as the professional markets.

This new amplifier has a smooth design, thanks to the curved unit. Besides, it is equipped with multiple options for installation. The bright panel and the smoke controlled cover ensure that you do not have difficulty in installing the amplifier in any area of your car. The control keys of the amplifier do not require any tools for adjusting its control keys.

The JVC plate of this versatile amplifier can be arranged in various ways enabling flexible settings. The feature of cascade stacking helps the users to pair multiple amplifiers and also proves very handy when it comes to the bridging function externally. Users can also bring multiple amplifiers at play simultaneously using the external bridges of the amplifier through an optional pin connector. The amplifier can be pushed to 3000W by using a master unit and a slave unit.

The master unit performs all the adjustments and controls and can also integrate a remote control. The frequency response of the amplifier is between 20 to 300Hz and it has a maximum power pre-output of 1800W. Some of the other features of the KS-AR9501D Arsenal Amplifier include gold plated RCA jacks and block terminals, a protection circuitry, an anti-pop circuit and a control panel on the front. Users can take full advantage of these features at an affordable price of $599.95.

An amplifier is the best way to enhance the performance of the audio system of your car without incurring too much cost. It supplies increased powers to your speakers which in turn produce stronger and detailed sound regardless of the genre of music you are listening to. However, it is important that you tune up your car amplifier properly so that it serves its purpose.

Your amplifiers have filters, which decide the frequency range for your speakers. So, it is important that they are adjusted well in order to get stronger and better sound out of your car speakers. The high-pass filter of the amplifier should be adjusted to determine the frequency that should go to the front speakers and it should be done as per your liking. Similarly, the low-pass filter should be adjusted for the frequency that goes to the rear speakers and should be done to match your fancy.

The next step in fine tuning your amplifier is setting the gain of your amplifier. The gain control is responsible for the signal power that goes to your amplifier. The gain should be set as high as not to create any distortion to your car audio system. You must set the gain after checking the distortion level with music from different sources.

Another important thing to consider is the physical connection and you must ensure it to be of superior quality. RCA cables, power cables and speaker wire of high quality go a long way in enhancing the overall performance of your amplifiers.

The PDX-4.150 channel amplifier from Alpine is one fine gadget which offers awesome power to your car’s music. The amplifier provides 150 watts of great power to each channel and full range power to most subs. The amplifier has been wonderfully designed with strong internal components to ensure strong power output. It also keeps the noise level low for high fidelity and control. The 4-channel car amplifier has controls which are front mounted making the post installation adjustments very easy.

The amplifier has gold plated RCA inputs and power connections which prevent corrosion and degradation of signals in the long run. The PDX-4.150 also boasts of Nifty speaker wire plugs which promise tighter connection and ensure that the speakers of your car work in unison. The amplifier has such a wonderful fidelity that you would find yourself sitting in your car just listening to the beautiful sound coming out from your speakers. The amplifier has a class-D design with variable high and low pass filters. The installation design of the amp is stackable and has front panel controls. With quick connect speaker system and preamp level inputs; it is defiantly going to score among a wide range of users.

The amplifier is CEA-2006 compliant and also has MOSFET power stages. The amplifier though does not come with wires and hardware which you may consider including. It is advisable to get rid of any engine noise before you install this amplifier. Overall, with a warranty of 1 year, this amplifier will definitely get a thumbs up from all those who use it.

The Premier Series PRS-D2000SPL amplifier from Pioneer is one incredible amplifier, which stands way above the rest of the other amplifiers that intend to give it a competition. The wonderfully engineered amplifier is an absolute powerhouse when it comes to performance. The colossal power and the efficiency of the amplifier is a result of the class D technology that has been used during its production.

Its power can be increased to as high as 8000 watts if you bridge the amplifiers together externally. The TS-W3001D2/4 subwoofer is a perfect match for this amplifier and can produce incredibly powerful music when these two are connected together. The subsonic filter of this 1-ohm mono stable amplifier enables you to optimize your subs to the max. The externally bridgeable units allow you to join two separate amplifiers. You get the power of a single woofer and do not necessarily require any special cable for this. It can be done very easily with a RCA cable and some minor adjustments in the Sync mode settings.

The MASS technology used by Pioneer gives you the freedom from the hassles of adjusting each amplifier’s gain separately. The DAP protection circuitry prevents amplifiers from failing providing reliability and efficiency in its performance. The variable crossover ensures that you get the best sound possible in terms of quality as it allows you to filter out higher frequency signals and send the lower ones to your subs. You can control the music sounds with the help of the variable bass boost and the best part is that the PRS-D2000SPL comes with a warranty of 2 years which is almost double of what you are likely to get offered from its competitors.

The Blaupunkt PCA 265 amplifier is the best choice available if you are looking to get rid of your old sound system as it is very versatile and gives you an amazing performance.

The PCA 265 comes with a single channel mode for 175 watt and a double channel mode which give out 65 watts of uninterrupted power which means you can power a set of speakers or a subwoofer system very easily. You can also alter the amplifier output to match your sound system with the help of the built in frequency filter. The preamp level and the stereo speaker level inputs of the car make it really easy for you to connect this amplifier to an aftermarket or a factory car stereo.

The Blaupunkt PCA 265 amplifier frees you from the problem of getting a portable player to play through the aftermarket car stereo system. The portable music players can easily be plugged inside the Direct Auxiliary input and provides incredible sound through the speakers of your car. The high level input design enables radio connection to be connected directly to the amplifier’s loudspeaker output.

The amplifier can be used for single or more subwoofers as it has the feature to link a single configuration. The frequency of the amplifier can be altered between 50 Hz to 250 Hz. The green LED of the amplifier glows to show that the amplifier is in operational mode and the red LED glows when the amplifier goes in the protection mode.